If the port values are any different, change them. You can see the actual range under the "General SIP Settings" page. While you are in your firewall configuration, you may as well also open UDP port 4569 (IAX), since sooner or later you'll probably want to accept IAX connections. All these ports are UDP, opening the TCP ports will NOT help anything and may expose your system needlessly. For SIP protocol, open UDP (NOT TCP) port 5060 (SIP) AND ports 10000-20000 (RTP, which must also be defined in /etc/asterisk/rtp.conf, see below). You must make sure that you open the correct UDP ports in your router's firewall and pointed at your Asterisk server. RTP Port Range Open the SIP and RTP ports to your Asterisk server Since I have additional WAN IP addresses from my ISP, I configured an IP Alias using one of thes. They are running in HA with CARP on LAN, WAN and DMZ. My main problem is that I know nothing about Linux so I have no idea what I am doing. In these boxes you will put your LAN information with the IP in the first box and the SUBNET in the second box Dear Community I have a pair of pfSense firewalls running 2.4.5-RELEASE-p1. I am trying to install the G.729 codec form intel but I am just going around in circles. Under "NAT" you will see a box for "Local Networks" Whenever you make a change in the UI you need to "submit" the changes then click "APPLY" at the topĪfter clicking "submit changes" and the Red Apply click "General SIP Settings" on the right menu
0 Comments
Leave a Reply. |